Ochre-based compound adhesives at the Mousterian type-site document complex cognition and high investment.

Ancient adhesives used in multicomponent tools may be among our best material evidences of cultural evolution and cognitive processes in early humans. African Homo sapiens is known to have made compound adhesives from naturally sticky substances and ochre, a technical behavior proposed to mark the advent of elaborate cognitive processes in our species. Foragers of the European Middle Paleolithic also used glues, but evidence of ochre-based compound adhesives is unknown. Here, we present evidence of this kind. Bitumen was mixed with high loads of goethite ochre to make compound adhesives at the type-site of the Mousterian, Le Moustier (France). Ochre loads were so high that they lowered the adhesive's performance in classical hafting situations where stone implements are glued to handles. However, when used as handheld grips on cutting or scraping tools, a behavior known from Neanderthals, high-ochre adhesives present a real benefit, improving their solidity and rigidity. Our findings help understand the implications of Pleistocene adhesive making.

The effect of worked material hardness on stone tool wear.

The identification of ancient worked materials is one of the fundamental goals of lithic use wear analysis and one of the most important parts of understanding how stone tools were used in the past. Given the documented overlaps in wear patterns generated by different materials, it is imperative to understand how individual materials' mechanical properties might influence wear formation. Because isolating physical parameters and measuring their change is necessary for such an endeavor, controlled (rather than replicative) experiments combined with objective measurements of surface topography are necessary to better grasp how surface modifications formed on stone tools. Therefore, we used a tribometer to wear natural flint surfaces against five materials (bone, antler, beech wood, spruce wood, and ivory) under the same force, and speed, over one, three, and five hours. The study aimed to test if there is a correlation between surface modifications and the hardness of the worked material. We measured each raw material's hardness using a nano-indentation test, and we compared the surface texture of the flint bits using a 3D optical profilometer. The interfacial detritus powder was analyzed with a scanning electron microscope to look for abraded flint particles. We demonstrate that, contrary to expectation, softer materials, such as wood, create a smoother surface than hard ones, such as ivory.

Mechanical properties of lithic raw materials from Kazakhstan: Comparing chert, shale, and porphyry.

The study of lithic raw material quality has become one of the major interpretive tools to investigate the raw material selection behaviour and its influence to the knapping technology. In order to make objective assessments of raw material quality, we need to measure their mechanical properties (e.g., fracture resistance, hardness, modulus of elasticity). However, such comprehensive investigations are lacking for the Palaeolithic of Kazakhstan. In this work, we investigate geological and archaeological lithic raw material samples of chert, porphyry, and shale collected from the Inner Asian Mountain Corridor (henceforth IAMC). Selected samples of aforementioned rocks were tested by means of Vickers and Knoop indentation methods to determine the main aspect of their mechanical properties: their indentation fracture resistance (a value closely related to fracture toughness). These tests were complemented by traditional petrographic studies to characterise the mineralogical composition and evaluate the level of impurities that could have potentially affected the mechanical properties. The results show that materials, such as porphyry possess fracture toughness values that can be compared to those of chert. Previously, porphyry was thought to be of lower quality due to the anisotropic composition and coarse feldspar and quartz phenocrysts embedded in a silica rich matrix. However, our analysis suggests that different raw materials are not different in terms of indentation fracture resistance. This work also offers first insight into the quality of archaeological porphyry that was utilised as a primary raw material at various Upper Palaeolithic sites in the Inner Asian Mountain Corridor from 47-21 ka cal BP.

Correction: Finding karstic caves and rockshelters in the Inner Asian mountain corridor using predictive modelling and field survey.

[This corrects the article DOI: 10.1371/journal.pone.0245170.].

Operationalizing niche construction theory with stone tools.

One of the greatest difficulties with evolutionary approaches in the study of stone tools (lithics) has been finding a mechanism for tying culture and biology in a way that preserves human agency and operates at scales that are visible in the archaeological record. The concept of niche construction, whereby organisms actively construct their environments and change the conditions for selection, could provide a solution to this problem. In this review, we evaluate the utility of niche construction theory (NCT) for stone tool archaeology. We apply NCT to lithics both as part of the "extended phenotype" and as residuals or precipitates of other niche-constructing activities, suggesting ways in which archaeologists can employ niche construction feedbacks to generate testable hypotheses about stone tool use. Finally, we conclude that, as far as its applicability to lithic archaeology, NCT compares favorably to other prominent evolutionary approaches, such as human behavioral ecology and dual-inheritance theory.

Finding karstic caves and rockshelters in the Inner Asian mountain corridor using predictive modelling and field survey.

The area of the Inner Asian Mountain Corridor (IAMC) follows the foothills and piedmont zones around the northern limits of Asia's interior mountains, connecting two important areas for human evolution: the Fergana valley and the Siberian Altai. Prior research has suggested the IAMC may have provided an area of connected refugia from harsh climates during the Pleistocene. To date, this region contains very few secure, dateable Pleistocene sites, but its widely available carbonate units present an opportunity for discovering cave sites, which generally preserve longer sequences and organic remains. Here we present two models for predicting karstic cave and rockshelter features in the Kazakh portion of the IAMC. The 2018 model used a combination of lithological data and unsupervised landform classification, while the 2019 model used feature locations from the results of our 2017-2018 field surveys in a supervised classification using a minimum-distance classifier and morphometric features derived from the ASTER digital elevation model (DEM). We present the results of two seasons of survey using two iterations of the karstic cave models (2018 and 2019), and evaluate their performance during survey. In total, we identified 105 cave and rockshelter features from 2017-2019. We conclude that this model-led approach significantly reduces the target area for foot survey.

The mineralogy and structure of use-wear polish on chert.

Polished edges of archaeological stone tools are commonly investigated to obtain information on the tools' uses in prehistory. Yet to this day, it remains unclear what exactly such polishes are and how they form. Answering these questions should allow the elaboration of new interpretative methods based on objective measurements. Two major competing hypotheses of polish formation have been proposed: abrasion and the formation of a thin amorphous film on the chert or flint surface. We employ reflectance infrared spectroscopy, a technique particularly sensitive to thin amorphous films, to investigate these two hypotheses. We found no added amorphous layer that would have formed upon friction against bone, antler, ivory or wood. Our observations suggest polish formation by abrasion, notwithstanding previous claims of added amorphous surface structures. This has implications for our understanding of the physical processes taking place during friction of chert and flint against different materials. Our results also open the possibility to propose new pathways for identifying different use-wear processes, based on the degree of abrasion.

Birch tar production does not prove Neanderthal behavioral complexity.

Birch tar production by Neanderthals-used for hafting tools-has been interpreted as one of the earliest manifestations of modern cultural behavior. This is because birch tar production per se was assumed to require a cognitively demanding setup, in which birch bark is heated in anaerobic conditions, a setup whose inherent complexity was thought to require modern levels of cognition and cultural transmission. Here we demonstrate that recognizable amounts of birch tar were likely a relatively frequent byproduct of burning birch bark (a natural tinder) under common, i.e., aerobic, conditions. We show that when birch bark burns close to a vertical to subvertical hard surface, such as an adjacent stone, birch tar is naturally deposited and can be easily scraped off the surface. The burning of birch bark near suitable surfaces provides useable quantities of birch tar in a single work session (3 h; including birch bark procurement). Chemical analysis of the resulting tar showed typical markers present in archaeological tar. Mechanical tests verify the tar's suitability for hafting and for hafted tools use. Given that similarly sized stones as in our experiment are frequently found in archaeological contexts associated with Neanderthals, the cognitively undemanding connection between burning birch bark and the production of birch tar would have been readily discoverable multiple times. Thus, the presence of birch tar alone cannot indicate the presence of modern cognition and/or cultural behaviors in Neanderthals.

Evidence for close-range hunting by last interglacial Neanderthals.

Animal resources have been part of hominin diets since around 2.5 million years ago, with sharp-edged stone tools facilitating access to carcasses. How exactly hominins acquired animal prey and how hunting strategies varied through time and space is far from clear. The oldest possible hunting weapons known from the archaeological record are 300,000 to 400,000-year-old sharpened wooden staves. These may have been used as throwing and/or close-range thrusting spears, but actual data on how such objects were used are lacking, as unambiguous lesions caused by such weapon-like objects are unknown for most of human prehistory. Here, we report perforations observed on two fallow deer skeletons from Neumark-Nord, Germany, retrieved during excavations of 120,000-year-old lake shore deposits with abundant traces of Neanderthal presence. Detailed studies of the perforations, including micro-computed tomography imaging and ballistic experiments, demonstrate that they resulted from the close-range use of thrusting spears. Such confrontational ways of hunting require close cooperation between participants, and over time may have shaped important aspects of hominin biology and behaviour.

A chronological framework connecting the early Upper Palaeolithic across the Central Asian piedmont.

Central Asia has delivered significant paleoanthropological discoveries in the past few years. New genetic data indicate that at least two archaic human species met and interbred with anatomically modern humans as they arrived into northern Central Asia. However, data are limited: known archaeological sites with lithic assemblages generally lack human fossils, and consequently identifying the archaeological signatures of different human groups, and the timing of their occupation, remains elusive. Reliable chronologic data from sites in the region, crucial to our understanding of the timing and duration of interactions between different human species, are rare. Here we present chronologies for two open air Middle to Upper Palaeolithic (UP) sequences from the Tien Shan piedmont in southeast Kazakhstan, Maibulak and Valikhanova, which bridge southern and northern Central Asia. The chronologies, based on both quartz optically stimulated luminescence (OSL) and polymineral post-infrared infrared luminescence (pIR-IRSL) protocols, demonstrate that technological developments at the two sites differ substantially over the ∼47-19 ka time span. Some of the innovations typically associated with the earliest UP in the Altai or other parts of northeast Asia are also present in the Tien Shan piedmont. We caution against making assumptions about the directionality of spread of these technologies until a larger, better defined database of transitional sites in the region is available. Connections between the timing of occupation of regions, living area setting and paleoenvironmental conditions, while providing hypotheses worth exploring, remain inconclusive. We cautiously suggest a trend towards increasing occupation of open air sites across the Central Asian piedmont after ∼40 ka, corresponding to more humid climatic conditions which nevertheless included pulses of dust deposition. Human occupation persisted into the Last Glacial Maximum, despite cooler, and possibly drier, conditions. Our results thus provide additional data to substantiate arguments for occupation of Central Asia.

High handaxe symmetry at the beginning of the European Acheulian: The data from la Noira (France) in context.

In the last few decades, new discoveries have pushed the beginning of the biface-rich European Acheulian from 500 thousand years (ka) ago back to at least 700 ka, and possibly to 1 million years (Ma) ago. It remains, however, unclear to date if handaxes arrived in Europe as a fully developed technology or if they evolved locally from core-and-flake industries. This issue is also linked with another long-standing debate on the existence and behavioral, cognitive, and social meaning of a possibly chronological trend for increased handaxe symmetry throughout the Lower Paleolithic. The newly discovered sites can provide a link between the much older Acheulian in Africa and the Levant and the well-known assemblages from the later European Acheulian, enabling a rigorous testing of these hypotheses using modern morphometric methods. Here we use the Continuous Symmetry Measure (CSM) method to quantify handaxe symmetry at la Noira, a newly excavated site in central France, which features two archaeological levels, respectively ca. 700 ka and 500 ka old. In order to provide a context for the new data, we use a large aggregate from the well-known 500 ka old site of Boxgrove, England. We show that handaxes from the oldest layer at la Noira, although on average less symmetric than both those from the younger layers at the same site and than those from Boxgrove, are nevertheless much more symmetric than other early Acheulian specimens evaluated using the CSM method. We also correlate trends in symmetry to degree of reduction, demonstrating that raw material availability and discard patterns may affect observed symmetry values. We conclude that it is likely that, by the time the Acheulian arrived in Europe, its makers were, from a cognitive and motor-control point of view, already capable of producing the symmetric variant of this technology.

Dynamic Monitoring Reveals Motor Task Characteristics in Prehistoric Technical Gestures.

Reconstructing ancient technical gestures associated with simple tool actions is crucial for understanding the co-evolution of the human forelimb and its associated control-related cognitive functions on the one hand, and of the human technological arsenal on the other hand. Although the topic of gesture is an old one in Paleolithic archaeology and in anthropology in general, very few studies have taken advantage of the new technologies from the science of kinematics in order to improve replicative experimental protocols. Recent work in paleoanthropology has shown the potential of monitored replicative experiments to reconstruct tool-use-related motions through the study of fossil bones, but so far comparatively little has been done to examine the dynamics of the tool itself. In this paper, we demonstrate that we can statistically differentiate gestures used in a simple scraping task through dynamic monitoring. Dynamics combines kinematics (position, orientation, and speed) with contact mechanical parameters (force and torque). Taken together, these parameters are important because they play a role in the formation of a visible archaeological signature, use-wear. We present our new affordable, yet precise methodology for measuring the dynamics of a simple hide-scraping task, carried out using a pull-to (PT) and a push-away (PA) gesture. A strain gage force sensor combined with a visual tag tracking system records force, torque, as well as position and orientation of hafted flint stone tools. The set-up allows switching between two tool configurations, one with distal and the other one with perpendicular hafting of the scrapers, to allow for ethnographically plausible reconstructions. The data show statistically significant differences between the two gestures: scraping away from the body (PA) generates higher shearing forces, but requires greater hand torque. Moreover, most benchmarks associated with the PA gesture are more highly variable than in the PT gesture. These results demonstrate that different gestures used in 'common' prehistoric tasks can be distinguished quantitatively based on their dynamic parameters. Future research needs to assess our ability to reconstruct these parameters from observed use-wear patterns.

The Campanian Ignimbrite eruption: new data on volcanic ash dispersal and its potential impact on human evolution.

The Campanian Ignimbrite (CI) volcanic eruption was the most explosive in Europe in the last 200,000 years. The event coincided with the onset of an extremely cold climatic phase known as Heinrich Event 4 (HE4) approximately 40,000 years ago. Their combined effect may have exacerbated the severity of the climate through positive feedbacks across Europe and possibly globally. The CI event is of particular interest not only to investigate the role of volcanism on climate forcing and palaeoenvironments, but also because its timing coincides with the arrival into Europe of anatomically modern humans, the demise of Neanderthals, and an associated major shift in lithic technology. At this stage, however, the degree of interaction between these factors is poorly known, based on fragmentary and widely dispersed data points. In this study we provide important new data from Eastern Europe which indicate that the magnitude of the CI eruption and impact of associated distal ash (tephra) deposits may have been substantially greater than existing models suggest. The scale of the eruption is modelled by tephra distribution and thickness, supported by local data points. CI ashfall extends as far as the Russian Plain, Eastern Mediterranean and northern Africa. However, modelling input is limited by very few data points in Eastern Europe. Here we investigate an unexpectedly thick CI tephra deposit in the southeast Romanian loess steppe, positively identified using geochemical and geochronological analyses. We establish the tephra as a widespread primary deposit, which blanketed the topography both thickly and rapidly, with potentially catastrophic impacts on local ecosystems. Our discovery not only highlights the need to reassess models for the magnitude of the eruption and its role in climatic transition, but also suggests that it may have substantially influenced hominin population and subsistence dynamics in a region strategic for human migration into Europe.

The handaxe reloaded: a morphometric reassessment of Acheulian and Middle Paleolithic handaxes.

This paper examines shape and size variability in Mousterian of Acheulian Tradition (MTA) handaxes and compares the observed patterns to those in the Lower Paleolithic Acheulian, both to better understand variability in MTA handaxes and to test whether or not this variability, particularly as it relates to resharpening and reduction, is structured similarly to that in the Acheulian. The Acheulian data set is based on previously published data with the addition here of a study of the handaxes from the site of Boxgrove, England. The MTA data set is based on four classic sites from southwest France with large handaxe collections. Both standard caliper-based morphometrics and Elliptical Fourier Analysis applied to coordinate data taken from digitized images of handaxes are used to assess shape. The result is that, contrary to expectations based on assumptions of evolving technological skill, handaxes in the MTA are as or more variable in shape than Acheulian ones. This variation is allometric in Acheulian handaxes, and is linked to resharpening from the tip down to the base, but is not related to size in the MTA samples. These results suggest that the goals and constraints of handaxe manufacture, but particularly handaxe reduction as a result of reworking during use, were quite different in the MTA and Acheulian, implying that conclusions about hominin cognition drawn from patterns in shape variability in handaxes must be understood in the context of artifact life histories.

Shape variation in Aterian tanged tools and the origins of projectile technology: a morphometric perspective on stone tool function.

BACKGROUND: Recent findings suggest that the North African Middle Stone Age technocomplex known as the Aterian is both much older than previously assumed, and certainly associated with fossils exhibiting anatomically modern human morphology and behavior. The Aterian is defined by the presence of 'tanged' or 'stemmed' tools, which have been widely assumed to be among the earliest projectile weapon tips. The present study systematically investigates morphological variation in a large sample of Aterian tools to test the hypothesis that these tools were hafted and/or used as projectile weapons. METHODOLOGY/PRINCIPAL FINDINGS: Both classical morphometrics and Elliptical Fourier Analysis of tool outlines are used to show that the shape variation in the sample exhibits size-dependent patterns consistent with a reduction of the tools from the tip down, with the tang remaining intact. Additionally, the process of reduction led to increasing side-to-side asymmetries as the tools got smaller. Finally, a comparison of shape-change trajectories between Aterian tools and Late Paleolithic arrowheads from the North German site of Stellmoor reveal significant differences in terms of the amount and location of the variation. CONCLUSIONS/SIGNIFICANCE: The patterns of size-dependent shape variation strongly support the functional hypothesis of Aterian tools as hafted knives or scrapers with alternating active edges, rather than as weapon tips. Nevertheless, the same morphological patterns are interpreted as one of the earliest evidences for a hafting modification, and for the successful combination of different raw materials (haft and stone tip) into one implement, in itself an important achievement in the evolution of hominin technologies.